Highlight Storage

Data Domain Virtual Edition install and configuration overview

Data Domain OVF

As of September 2016 EMC released Data Domain Virtual Edition 3.0. Possibly the fastest way to describe DDve 3.0 is a software appliance dedicated to Storage Protection supporting different protocols including CIFS and NFS. As a such DDve should always be paired with a Backup solution of your choice like VMware Data Protection appliance, Veeam or other solutions you might have available and capable of leveraging bespoke storage protocols including the proprietary Data Domain Boost. The virtual edition runs on the DD OS and keeps the core enterprise features that made this solution very popular.

As I like experimenting and learning more about new offerings I couldn’t resist and found out the Data Domain virtual edition ships with different capabilities and licensing. Luckily the evaluation edition can support up to 500 GB where there is no limitation on the functionalities other than maximum storage supported that can be purchased in increments of 1 TB up to 96 TB. This is great news for my home lab and decided to give it go hence this article which I hope can be interesting for the ones who want to try Data Domain virtual edition in their home lab.

I have organised this article in two parts: installation and configuration. Let’s start with the first part:

Data Domain virtual edition Installation

Data Domain virtual edition 3.0 is available for both VMware and Hyper-V platforms. Depending on your needs you might want to download the proper version available from this page:

https://uk.emc.com/products-solutions/trial-software-download/data-domain-virtual-edition.htm

Once the zip file has been downloaded (roughly 1.7 GB) copy and extract the content to a location from where we can then deploy the OVF file to our Host. In my case I will be using the VMware version of the Data Domain appliance. Steps to deploy the OVF are pretty easy as shown in the screenshots below.

domalab.com Data Domain virtual edition deploy ovf

The zip file includes the OVA package, an evaluation file along with a Readme with a quick description. At this point let’s locate the OVA file to be deployed

domalab.com Data Domain virtual edition ovf

The OVA package reads like the screenshot below

domalab.com Data Domain virtual edition ovf details

Let’s accept the Licence Agreement

domalab.com Data Domain virtual edition ovf license

We can now specify the location in the object structure where the appliance will be deployed

domalab.com Data Domain virtual edition ovf location

In my case I will be using the first configuration specs.

domalab.com Data Domain virtual edition ovf configuration

As per official documentation other specs are available

domalab.com Data Domain virtual edition ovf specifications

Next is to choose the VMware Datastore where to deploy the storage appliance. I would recommend using the Thick Provisioning Lazy Zeroed for this exercise

domalab.com Data Domain virtual edition select storage

We can now choose how to map the vNICs to our environment. We can also choose to set the IP addressing automatically with DHCP (default choice) and IPv6 instead of IPv4 if available

domalab.com Data Domain virtual edition setup network

As per usual a quick summary to review the general settings. What it is important at this point is not to “Power on after deployment” as we need to add the first Disk which will be used for our storage. The appliance already ships with 2 Disks but are used by the system

domalab.com Data Domain virtual edition wizard summary

As expected in the task pane the notifications about the OVF deployment

domalab.com Data Domain virtual edition ovf deploy task

We can now edit the VM appliance configuration. The purpose is to add the Disk which will be used for storage

domalab.com Data Domain virtual edition settings

As per screenshot below let’s add a new hard drive

domalab.com Data Domain virtual edition add disk

Please note that the evaluation version supports up to 0.5 TB. An initial Disk of 200 GB would be more than sufficient for our testing and leave space for adding extra drives before reaching the license limit. As per usual I would recommend using the Thick Provisioning with Lazy Zeroed

domalab.com Data Domain virtual edition new disk

We can now Power on the virtual appliance and proceed with the second part of the article on the Data Domain virtual edition first time configuration.

About the author

Michele Domanico

Passionate about Virtualization, Storage, Data Availability and Software Defined Data Center technologies. The aim of Domalab.com is sharing with the Community the knowledge and experience gained with customers, industry leaders and like minded peers. Always open to constructive feedback and new challenges.

Add Comment

Click here to post a comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Browse articles

November 2018
M T W T F S S
« Oct    
 1234
567891011
12131415161718
19202122232425
2627282930  

Articles by Category

Archives

%d bloggers like this: